Ampoule LED 12V 1 Watt

Beautiful and Bright!

These LED bulbs are powerful, economical, and attractive. Their round shape is elegant, and they don't heat up much. They are very practical and easy to connect: they have no polarity, so they can be connected (and powered) in any direction. There's no risk of making a mistake or damaging the bulb by reversing the connection.

They are thin, flat, making them easy to integrate into a device, for example, behind a diffuser.

They have 2 pins for connection. By default, they are designed to operate with a 12 Volt supply. When connected to the outputs of our actuator boards, their light can be controlled from a computer or Raspberry Pi with dimming: brightness dimming on 128 steps with a standard Command board + Transistor board, or high-resolution dimming on 16,384 steps with a 4 PWM 4 Servos board or a HD Command board. The latter option is particularly suitable for very low light variations and allows LED lighting to replicate the sensitivity of incandescent lights.

We provide them in two variants: warm white and neutral white.

Some technical characteristics

Cold white bulb

LED white light LED

• Size: 2.3 cm in diameter, 3.3 cm long (including bulb and pins), 4.5 mm thick.
• Color temperature: 6000K.
• Pins: G4, 5 mm spacing.
• Power: 1 Watt (which is 83 milliamps for a 12 Volt power supply).

Neutral white or warm white bulb

Same size characteristics.

Color temperature: 2800K.

Example of application

Light and servomotor control via Usine at Interface-z